American Standard TW001L-OV.011 Guida di Installazione

Navigare online o scaricare Guida di Installazione per no American Standard TW001L-OV.011. American Standard TW001L-OV.011 Installation Guide Manuale Utente

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 4
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 0
754916-100
OVATION
TUB
HIGH GLOSS ACRYLIC SURFACE
INSTALLATION INSTRUCTIONS
BEFORE YOU BEGIN....
Local building codes vary by location. Observe all local plumbing and building codes.
Your new bath is shipped to you after careful inspection. All you need to finish the installation are your selected fittings.
To ensure maximum performance and pleasure from this product, please follow the instructions and cautions.
TOOLS & MATERIALS REQUIRED....
NOTE: Take extra care in handling surfaces of the bath. Use only non-abrasive cloths to avoid scratching.
• Level
• Square
• Tape Measure
• Pipe Wrench
• Slip Joint Pliers
• Nails
• Plumber’s Putty
• Silicone Sealant
• 1 x 3 or 2 x 4 Stringers
• Drop Cloth
• Mortar Mix or Grout
TOOLS:
• Screw Driver
• Standard Woodworking Tools
• Personal Safety Equipment
• Caulking Gun
MATERIALS:
MODELS: 2647.112 & 2647.212
USED WITH BATH WALLS: 3060BW1
Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed
properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be
sure your installation conforms to local codes.
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2013
GENERAL INSTALLATION INFORMATION ...
1. When installing the matching ovation bath walls (model 3060BW1), additional studs may be required.
Refer to those installation instructions prior to installing tub.
2. Ovation bath walls are to be installed over stud walls.
3. Bath may only be installed in a recess type installation.
4. It is recommended that the tub be set in a small bed of mortar or grout tocompensate for uneven floors.
Stringers will help level tub but will not provide adequate support.
5. Take extra care when driving nails or screw to avoid damaging the bath.
Vedere la pagina 0
1 2 3 4

Sommario

Pagina 1 - INSTALLATION INSTRUCTIONS

754916-100OVATION™ TUBHIGH GLOSS ACRYLIC SURFACEINSTALLATION INSTRUCTIONSBEFORE YOU BEGIN...Local building codes vary by location. Observe all local

Pagina 2 - ILLUSTRATION 2

2754916-10060 x 30 x 18 In.(1524 x 762 x 457mm)60 Lbs. (27 Kg)435 Lbs.(197 Kg)45 Gal. (170 L)22.25 x 44.25 In.(565 x 1124mm)27.75 X 53.125 In.(705 x 1

Pagina 3 - TYPICAL RECESS INSTALLATION

754916-1003DRAIN CONNECTIONUsing recommended drain opening, connect bath drain to waste line. Tighten all drain joints securely.332A.) THIS BATH MUST

Pagina 4 - 754916-100

754916-1004POST INSTALLATION CLEAN-UPRemove all construction debris from bath. Tile grout can be removed with a wooden popsicle stick or tongue depres

Commenti su questo manuale

Nessun commento